Operating Instructions of Cutting wheels in the Cutting Machines

Operating Instructions of Cutting wheels

 in the Cutting Machines

The main content here is about the operation specification of the Cutting wheel in the use of the cutting machine, so that the operator can have a better and comfortable cutting experience. At present, we have the following cutting machines in the market for reference, like Angle grinder, Pneumatic cutting machine, Circular saw, Gasoline cutter machine etc. Normally the angle grinder is very frequently used in industry fields or small workshops, are you attention to the following matters when using the angle grinder?

Next I will start with the operation Instruction of cutting wheel on the angle grinder as example :


Step 1: Before working, you must wear labor protection equipment and check whether the equipment has a qualified grounding wire.


Step 2: It is necessary to check whether the cutting machine is in good condition and whether the cutting wheel is cracked or defective. It is forbidden to use diseased equipment and unqualified cutting wheels. As shown in the picture below, the qualified cutting wheel is correctly installed on the angle grinder.


Step 3: When cutting the material, do not use excessive force or sudden impact, and immediately turn off the power when there is an abnormal situation.


Step 4: The material to be cut should be clamped with a vise, one person is not allowed to hold the material and one person is not allowed to cut the material, and the person must stand on the side of the grinding wheel when cutting the material.


Step 5: When replacing the cutting wheel, wait for the equipment to stop stably, and carefully check the cutting wheel for confirmation then.


Step 6: During operation, abrasive tools and other items are not allowed on the rack.

Step 7: The cutting machine should be placed on a stable ground, away from flammable items, and the power cord should be connected to a leakage protection device.


Step 8: The cutting disc should be installed as required, and the trial start operation should be stable before starting to work.


Step 9: The clamping device should be safe and reliable to prevent accidental loosening of the workpiece.


Step 10: When cutting, the operator should cut evenly and avoid the front of the cutting blade to prevent accidents due to improper operation of the cutting blade.



Step 11: After the work is completed, the dust on the surface of the cutting machine should be wiped and the workplace should be cleaned, and rainproof measures should be taken for outdoor storage.


Let’s work together safely and more efficiently!


Please contact BINIC ABRASIVE to know more about the abrasive industrial.