Find the grinding wheel suppliers name or logo on the polycarbide abrasive disc. This is accountability; you know that it is genuine and has been manufactured in accordance with appropriate safety guidelines.
Check the size of the polycarbide abrasive disc. You will find it on the label of the polycarbide abrasive disc. This size corresponds to the maximum size of the polycarbide abrasive disc you are grinding. This will be printed on the sticker of the grinding wheel supplier
Check the speed of the polycarbide abrasive disc. Please note the maximum RPM printed on the polycarbide abrasive disc label. Again, match it to the speed grade of the machine. The rated speed on the polycarbide abrasive disc should be greater than the speed of the machine
Check the sales/use date. This will be printed on the boss of the polycarbide abrasive disc
Check the code of the polycarbide abrasive disc. This will tell you the type of application you are going to make to make the polycarbide abrasive disc, including the granularity and hardness of the polycarbide abrasive disc. If in doubt, please visit the grinding wheel supplier’s website to decrypt the code.
Check the condition of the polycarbide abrasive disc. You are looking for cracks or debris. You also need to pay attention to the pollution of water or oil. Any of these problems can seriously damage the integrity of the polycarbide abrasive disc and may cause the polycarbide abrasive disc to rupture.
I inserted the polycarbide abrasive disc. Install the polycarbide abrasive discs correctly, pay attention to the flanges, make sure to insert them in the correct order
Tighten the polycarbide abrasive disc. Tighten the polycarbide abrasive disc with your fingers and gently tighten with a wrench. Don’t be too tight
Rotate the polycarbide abrasive disc. Rotate the polycarbide abrasive disc a few times to make sure it is properly installed and not biased
