Wire brush wire types: straight wire and curved wire (corrugated wire). Straight wire is suitable for drilling and planting brushes, such as wood wire brushes, wood handle wire brushes, disc wire brushes, etc.; and the application range of curved wire can basically be used for each type of wire brushes, especially spring wire brushes The roller must not be curved wire. If the straight wire is used, it is impossible to standardize and neat after the wire is folded in half. However, due to its own curvature, the curved wire can be relatively matched to the nearby brush wire during production, so that the folded wire is even asymmetrical , The inclination is slightly off and cannot be seen, and the wire on the surface of the brush roller formed in this way is more dense, strong, and has a strong rust removal and rebound strength.
Wire brush product categories: disc wire brush, wood wire brush, wood handle wire brush, wire brush wheel, wire brush roller, wire bar brush, wire pipe brush, spring wire brush, etc.
Steel wire brush wire model: steel wire models used in wire brushes are 201#, 206#, 304#, 316#, etc., select the corresponding model wire for different purposes, choose different wire diameters, so as to avoid unnecessary waste and achieve the ideal Clear the effect.
Steel wire brush material overview: 201# steel wire is more prone to rust when immersed in water. 206# stainless steel wire has a much stronger toughness than 204#. It is suitable for aluminum plants to perform special treatments such as scratching and grounding on the surface of the aluminum belt, or use Deburring in the plastic industry and wood industry. 304# stainless steel wire is a kind of high-quality steel wire. It is not only strong in toughness, but also resistant to acid and alkali. It is suitable for steel plate or mining and machinery manufacturing industries. It can remove rust, degrease and pickle the steel surface. There are two kinds of steel wire: straight wire and corrugated wire. The thickness of the wire can be determined according to different needs.
Wire brush application: Wire brushes, especially wire brush rollers, are usually used in steel or aluminum surface treatment plants. A series of stainless steel wire brush rollers are installed on a fully automatic high-speed brush polishing machine (brushing machine). The steel wire brush roll rotates and brushes the iron sheet at high speed on the upper and lower surfaces of the strip in the opposite direction to the rolling motion. The brushed iron oxide scale is washed away by a closed-loop cooling water flushing system.
Normal cleaning is to clean the anilox roller in time after shutdown, which can effectively prevent the ink from drying in the mesh holes. Generally, a special chemical cleaning agent is used to achieve the purpose of cleaning by softening and dissolving the ink in the mesh. The specific cleaning method is to apply an anilox roller cleaning agent to the anilox roller. After the foam appears, use a special steel wire brush (copper wire brush for metal anilox roller) to evenly scrub the surface of the anilox roller. After washing, rinse with water.
Note: The stainless steel superfine elastic steel wire brush is specially used to clean the ceramic anilox roller. This is because the hardness of the ceramic is much greater than that of the steel wire. The steel brush will not damage the ceramic layer on the surface of the anilox roller. The ultra-fine elastic copper wire brush is a common necessary cleaning tool for cleaning chrome-plated anilox rollers and gravure plate rollers. The effect is better when used in conjunction with cleaning agents.
Wire brush with wooden handle: Common specifications 6*14 or 5*14 holes, 304 stainless steel wire or ordinary steel wire. Each hole is usually implanted in half with five roots folded, and the wire extension is about 20mm. The brush made of ordinary steel wire is easy to rust, and it is not used. Compared with the wooden handle wire brush made of 304 stainless steel wire, the quality is too different.