Dry-cut diamond cup wheel and wet-cut diamond blades: What is the difference?

From head to toe, dry-cut diamond cup wheel bunnings compete with competitors. The dry cutter uses an air-cooled design that is different from the water-cooled construction of wetdiamond cup wheel bunnings. If careless or uninformed tool operators mix them together, the wet diamond cup wheel bunnings will dry out. It won’t run like this for a long time. Scrape off an expensive diamond cup wheel bunnings, right? Obviously, we need to know what makes them different.

Dry VS. Wet diamond cup wheel bunnings difference

If the cutting disc is classified as a wet tool, it will be used with water. Also, if the dried diamond cup wheel bunnings is pulled out of its rest position, it is used in the presence of a large amount of air flow. In addition, the air-cooled blade architecture uses a wider cutting section for improved drafting. If you want to maintain this ventilation, then the use of shallow cuts and “free spins” is the current thing. Wet diamond cup wheel bunnings are constantly soaked in water so they stay cool and cut deeper.

Machine difference

Wet-cut diamond cup wheel bunnings that are heavier and mounted on special equipment brackets are not hand tools. If the hand model is pulled from the rear of the worker’s truck, it is a dry cutter. It is still a diamond cup wheel bunnings, but its design is recommended for dry powder applications. In addition, for wet diamond cup wheel bunnings, heavy duty gears are waterproof. Water does not affect sealed electronic equipment. For dry cutting models, these considerations are secondary. The device’s weatherproof performance is small, so it can be used outdoors, but does not require a lot of waterproofing. By the way, back to the diamond cup wheel bunnings design, there is a difference between their metal bond forms.

Differences in diamond binding

At the edge of the drying pan, the wider portion uses laser welded mineral particles and a softer binder. The idea here is to ensure that the abrasive layer corrodes before the steel substrate overheats. Laser welding technology provides a high temperature anchor for the diamond and then decomposes it with a softer bonding material so that the dry cutting diamond cup wheel bunnings does not overheat. Importantly, if the diamond cup wheel bunnings is placed under pressure, it will not be used for long periods of time. An easy and convenient method is essential. Elsewhere, watching a wet-cut diamond cup wheel bunnings, its brazed gemstone and harder bonding layer contribute to heavy-duty grinding operations.

Continue deeper cutting and the water flow covers the wet diamond cutting disc. As the airflow cools through the depths of the reinforced concrete or steel, it also removes worn debris. As for the dry-cut diamond cup wheel bunnings, it is an excellent detail tool, but it is used intermittently and will not cut so deeply. As a last resort, wet cutting reduces particulate emissions and therefore reduces respiratory hazards. Dry cutting will release dangerous dust clouds. Wear a breathing apparatus when dry cutting.

BINIC-Abrasive tools support – If you have questions about these products or any abrasives, our sales and technical experts will be happy to help you. You can send a message in the contact form below.

Other people also read:

Leave a Reply

Your email address will not be published. Required fields are marked *