Although it is very beneficial to have a wood chipper that can handle the dead branches and branches that seem to accumulate in the yard, this can be another matter when the blade becomes dull and the blade needs to be sharpened. Fortunately, you can do this yourself – no more than 10 minutes.
To remove the wood grinding disc from the wood chipper, remove the feed chute. Then, slowly rotate the chipper mechanism (also called the impeller) by hand until one or two blades can be seen through the opening. There should be some hexagon socket screws to secure the blades to the impeller – these screws need to be removed to remove the blades. Continue this rotation until all wood grinding wheels are removed.
The best and most effective way to grind a psa sanding discs is to use a wood grinding disc. Be sure to follow the existing angle of the blade and grind the blade until a new metal strip is visible on the cutting surface. You should always try to remove as little metal as possible. Remember to constantly check that the edge of the disc grinding wheel is flat.
Once the wood grinding wheels are sharpened, they need to be placed back in the chipper to ensure that each blade is securely refastened using its associated socket head cap screws. Then, replace the feed chute and turn on the chipper to ensure it is working properly. If so, your wood chipper can process garden waste again.
BINIC-diamond cup grinding wheel factory – If you have questions about these products or any abrasives, our sales and technical experts will be happy to help you. You can send a message in the contact form below.