Factors to consider when choosing diamond cup grinding wheel

Knowing how to choose the right diamond cup grinding wheel can be a daunting process. It is important to have a number of factors at work to determine which type of wheel is best for your application.

Grinding purpose

It is important to determine the intended intent of the type of grinding that occurs primarily. You can break down between dry or wet grinding because they have different uses.

Depending on the economics and quality standards of the equipment – dry grinding can be better used for large-scale grinding, while wet grinding may be more suitable for precise cutting.

Diamond cup grinding wheel thickness

Another factor that cannot be ignored when drawing conclusions about diamond cup grinding wheel is roughness. The roughness of the diamond cutting disc ultimately determines the amount of material removed during grinding, which is called the “material removal rate.”

If it is necessary to make a rapid cut, it is best to consider using a coarser gravel. However, if more careful and precise cutting is required, fine grit will be more suitable for this purpose.

Material hardness

The diamond cup grinding wheel must have the ability to overcome the hardness of the material that needs to be grounded – this is where the wheel material works.

For hard non-ferrous metals, synthetic diamond cup grinding wheels are preferred to remove large amounts of these. Otherwise, if grinding with iron or steel, a diamond cup grinding wheel should be used.

Rotating speed

The speed at which the diamond cup grinding wheel rotates is critical to avoid the occurrence of defects in the diamond cutting disc thin during use. The diamond cup grinding wheel’s rotation rating is measured in meters per second – it is best to be familiar with these ratings and accurately use the correct road markings in the equipment to avoid unnecessary repairs to the diamond cup grinding wheel.

Leave a Reply

Your email address will not be published. Required fields are marked *