BINIC Pro Plus Flap Discs
Binic Abrasive produce Pro Plus Flap Discs for customer. We have size from diameter 100mm(4”) until Diameter 180mm(7”), and the Grit from 40 to 120.
Aluminium Oxide – Metal Grinding
Pro plus Flap Discs
With Increased Flaps Number
Features:
- Ensures low build-up of heat in the workhouse even when used with minimum contact pressure on variable-speed angle grinders at low rational speeds.
Product Advantage:
- Performs exceptionally well on sheet metal and thin profiles
Specifications:
★★★★★
| Image | Inch | Metric(mm) | Type | Grit |
 |
4”x5/8” | 100×16 | T27/29 | A40-120# |
| 4.5”x7/8” | 115×22.2 | T27/29 | A40-120# | |
| 5”x7/8” | 125×22.2 | T27/29 | A40-120# | |
| 6”X7/8” | 150×22.2 | T27/29 | A40-120# | |
| 7”x7/8” | 180×22.2 | T27/29 | A40-120# |
Zirconia Aluminium – Stainless Steel & Metal
Pro plus Flap Discs
With Increased Flaps Number
Features
- The pro plus stainless steel flap disc is a high-end product for all users who recognise quality.
- Increased number of lamellas, even more aggresive material removal rate ( steeper arrangement of lamellas) and still a higher lifetime than the AZ type.
Product Advantage:
- Improved tried-and-trusted top quality to optimize the efficiency of your tool.
Specification:
★★★★★
| Image | Inch | Metric(mm) | Type | Grit |
 |
4”x5/8” | 100×16 | T27/29 | ZA40-120# |
| 4.5”x7/8” | 115×22.2 | T27/29 | ZA40-120# | |
| 5”x7/8” | 125×22.2 | T27/29 | ZA40-120# | |
| 6”x7/8” | 150×22.2 | T27/29 | ZA40-120# | |
| 7”x7/8” | 180×22.2 | T27/29 | ZA40-120# |
Silicon Carbide – Stone Grinding
Pro plus Flap Discs
With Increased Flaps Number
Features
- Sharp cut, exvellent for finishing concrete, stone, fiberglass and other nonferrous materials(brass, bronze, aluminum, etc.) Excellent for both blending and finishing.
Product Advantage:
- High strength, lightweight, absorbs vibration.
- Ideal for end-users unable to measure performance.
Specifications:
★★★★★
| Image | Inch | Metric(mm) | Type | Grit |
 |
4”x5/8” | 100×16 | T27/29 | C40-120# |
| 4.5”x7/8” | 115×22.2 | T27/29 | C40-120# | |
| 5”x7/8” | 125×22.2 | T27/29 | C40-120# | |
| 6”x7/8” | 150×22.2 | T27/29 | C40-120# | |
| 7”x7/8” | 180×22.2 | T27/29 | C40-120# |
2 inch 1 – Calcined Alumina Stainless Steel & Metal
Pro plus Flap Discs
With increased Flaps Number
Features：
- Flat and conical flap disc with fiberglass or pastic backing support.
Product Advantages：
- High performance, durable.
Specification:
★★★★★
| Image | Inch | Metric(mm) | Type | Grit |
|
4″x5/8″ | 100×16 | T27 / 29 | A40-120＃ |
| 4.5″x7/8″ | 115×22.2 | T27 / 29 | A40-120＃ | |
| 5″x7/8″ | 125×22.2 | T27 / 29 | A40-120＃ | |
| 6″x7/8″ | 150×22.2 | T27 / 29 | A40-120＃ | |
| 7″x7/8″ | 180×22.2 | T27 / 29 | A40-120＃ |
