BINIC Standard Flap Discs
Binic Abrasive produce Standard Flap Discs for customer. We have size from diameter 100mm(4”) until Diameter 180mm(7”), and the Grit from 40 to 120.
Aluminium Oxide – Metal Grinding
Standard
Features:
- Flat and conical flap discs with fiberglass or plastic backing support
Product Advantage:
- High performance, durable
Specifications:
★★★☆
| Image | Inch | Metric(mm) | Type | Grit |
 |
4”x5/8” | 100×16 | T27/29 | A40-120# |
| 4.5”x7/8” | 115×22.2 | T27/29 | A40-120# | |
| 5”x7/8” | 125×22.2 | T27/29 | A40-120# | |
| 6”X7/8” | 150×22.2 | T27/29 | A40-120# | |
| 7”x7/8” | 180×22.2 | T27/29 | A40-120# |
Standard plus
With Increased Flaps Number
Features:
- Flat and conical flap discs with fiberglass or plastic backing support
Product Advantage:
- High performance, durable
Specifications:
★★★★
| Image | Inch | Metric(mm) | Type | Grit |
|
4”x5/8” | 100×16 | T27/29 | A40-120# |
| 4.5”x7/8” | 115×22.2 | T27/29 | A40-120# | |
| 5”x7/8” | 125×22.2 | T27/29 | A40-120# | |
| 6”X7/8” | 150×22.2 | T27/29 | A40-120# | |
| 7”x7/8” | 180×22.2 | T27/29 | A40-120# |
Zirconia Aluminium – Stainless Steel & Metal
Standard
Features
- Fast grinding through constant grinding aggresiveness to the last abrasive grit.
- Highest economic value through greater performance per time unit, less wear on the zirconium flap disc and reduced set-up times.
- The greatest possible stock removal.
- For use on stainless steel, sheet metal, tool steels, heat- treated steels, and for the grinding & finishing of welds. For aggressive use on heavy duty applications.
Product Advantage:
- Extremely long tool life.
Specification:
★★★☆
| Image | Inch | Metric(mm) | Type | Grit |
 |
4”x5/8” | 100×16 | T27/29 | ZA40-120# |
| 4.5”x7/8” | 115×22.2 | T27/29 | ZA40-120# | |
| 5”x7/8” | 125×22.2 | T27/29 | ZA40-120# | |
| 6”x7/8” | 150×22.2 | T27/29 | ZA40-120# | |
| 7”x7/8” | 180×22.2 | T27/29 | ZA40-120# |
Standard plus
With Increased Falps Number
Features:
- The support of the abrasive band consists of a cottont will which shows an outstanding removing rate and excellent lifetime-without clogging up!
- The glass fibre backing is characterised by an even grinding finish up to the complete consumption of the abrasive grain. As a result, no scratches on the workpeice will appear.
Product Advantage:
- Extremely long tool life.
Specification:
★★★★
| Image | Inch | Metric(mm) | Type | Grit |
|
4”x5/8” | 100×16 | T27/29 | ZA40-120# |
| 4.5”x7/8” | 115×22.2 | T27/29 | ZA40-120# | |
| 5”x7/8” | 125×22.2 | T27/29 | ZA40-120# | |
| 6”x7/8” | 150×22.2 | T27/29 | ZA40-120# | |
| 7”x7/8” | 180×22.2 | T27/29 | ZA40-120# |
Silicon Carbide – Stone Grinding
Standard
Features
- The standard silicon Carbide features an extremely tough Silicon Carbide abrasive grain.
- The silicon carbide disc is excellent for paint removal, blending/finishing, surface preparation, grinding and polishing.
Specification:
★★★☆
| Image | Inch | Metric(mm) | Type | Grit |
 |
4”x5/8” | 100×16 | T27/29 | C40-120# |
| 4.5”x7/8” | 115×22.2 | T27/29 | C40-120# | |
| 5”x7/8” | 125×22.2 | T27/29 | C40-120# | |
| 6”x7/8” | 150×22.2 | T27/29 | C40-120# | |
| 7”x7/8” | 180×22.2 | T27/29 | C40-120# |
Standard plus
With Increased Flaps Number
Features
- Flap disc equipped with silicon carbide abrasive on a glass fibre backing.
- Good removal rate on various materials
Specification:
★★★★
| Image | Inch | Metric(mm) | Type | Grit |
|
4”x5/8” | 100×16 | T27/29 | C40-120# |
| 4.5”x7/8” | 115×22.2 | T27/29 | C40-120# | |
| 5”x7/8” | 125×22.2 | T27/29 | C40-120# | |
| 6”x7/8” | 150×22.2 | T27/29 | C40-120# | |
| 7”x7/8” | 180×22.2 | T27/29 | C40-120# |
